Allflex EID Tag HDX (standard/982 - tamperproof)

Visit Sagebrush Tags on Facebook

Visit Sagebrush Blogs on WordPress

Allflex EID Tag HDX (standard/982 - tamperproof)

Allflex EID Tag HDX (standard/982 - tamperproof)

Allflex EID Tag HDX (standard/982 - tamperproof)
EID technology
Click to enlarge image(s)

The Allflex HDX (Half Duplex) High Performance Ultra EID Tag is ISO compliant and has a unique design that provides the ultimate in usability, security and retention. The single use ear tag features a ridged plastic design with a tamperproof cap. Transponder numbers are laser marked in a circular format on the edge of the tag.


HDX technology optimizes signal transmission and provides the greatest read distance. HDX technology may be beneficial to the system if used in packing plants, automated reading systems, or with a walk-through reader.

Construction
The tamperproof tag is injection molded Polyurethane female with a plastic injection molded tamperproof cap. The hard cap of the tag provides the highest degree of security available, as any attempt to remove the male tag from the female would cause the tag components to break, rendering them unusable.

Application
Allflex EID tags are applied with the Red Universal Total Tagger, Green Total Tagger Plus or the Ultra Retract-O-Matic tagger.
To apply with the Total Tagger, the Red Blunt Applicator pin must be installed and the Black or White insert must be removed.
Extended small males are used on these HDX tags for placement in a deeper location in the ear.

Tags are White in color.

Specifications may be seen below the ordering box.

Large quantities of HDX tags may be special order items, but should normally arrive in about 2-3 weeks.

*Important Application tips for EID tags:
  •  Use the red blunt pin and remove the black insert from the base of  the jaws.
  •  Be sure that the “bump” or raised portion of the tag which encloses the transponder chip, is placed in the open portion (facing out) of the jaws.
Specifications
HDX Tags white, 8.9 grams, 1.28" diameter x .280" thick
RFID Compatibility ISO 11784 Compliant
Duplex Mode HDX (HDX tags)
Operating Frequency 134.2 kHz
Marking 15-digit laser marked number
Security Tamperproof design
Application Options Universal Total Tagger/Ultra Retract-O-Matic
Manufacturers ID Code 982 as per ICAR assigned Manufacturers code
Power: Passive (inductively powered from transceiver reading equipment
Agency Certifications ISO 11785/ ISO 11784/ ICAR approved/ FCC approved
Material Polyurethane
Operating Temperature -0C to +50C
Expected Life 10 years
Read Distance Up to 60cm (23.62") (Antenna and reading system dependant)


Copyright 2006-2017 Sagebrush LLC USA. All rights reserved.
All images on this website are subject to copyright laws.
www.sagebrushtags.com

Phone:1-888-819-8782
7:00 AM to 7:00 PM CST Monday-Friday
8:00 AM to 5:00 PM Saturdays
Fax: 1-888-797-8409


sagebrushtags@gmail.com

E-Commerce Solutions
Sagebrush, LLC, Livestock Equipment & Supplies, De Smet, SD

All Orders Are Secure!